I/O terminal board：BCL4562
Motor control signal：
X/Y1/Y2 axes pulse output, maximum frequency 3MHz
Z axis analog output, -10 ~+10V
X/Y/Z axes access encoder feedback, maximum sampling frequency 10MHz
Dedicated inputs:6 limit inputs: X/Y1/Z axes +/- limit
Common inputs:6 inputs: low-level active, supports NO and NC;
Software:CypOne Laser Cutting Control Software
Interface type:32-bit PCI bus, 132MB/S
Work environment:Temperature: 0-55℃
Humidity: 5%-95%(no condensation)
Dedicated outputs:2 DA outputs: 0~10V，50mA
1 PWM output: 5V/24V for option, precision of 50KHz (0.1%)
Common outputs:8 outputs: relay output, 30V DC/5A
Trajectory accuracy 0.05mm, position accuracy 0.01mm.
Maximum cutting speed 100m/min, maximum travel speed 100m/min.
Don't support dual-drive gantry position error alarm and screw pitch error compensation.
Capture limit signal in return origin process.
Application：
Widely applied in advertising industry and low power fiber laser cutting machine within 1000W that mainly involved in thin metal sheet production.
