ERL 2700-3000nm Laser Safety Goggles Protective Goggles For Er laser Laser Cutting Engraving Machine
Optical Density : 2700 - 3000nm OD 6+
LB-Rating :2940nm DI LB3
Transmittance : 80%
Available for:2780nm, 2940nm
Application:Er lasers
According :CE EN207
Why do you need laser protective glasses (necessity!)
①Laser protective glasses, the purpose is to prevent laser.
②There are usually two kinds of lasers, the lasers between 400nm-780nm is visible light, the light can be seen. Lasers above 780nm are infrared light and are usually invisible.
③ High-energy laser, the most common is optical 1064nm(fiber);10600nm(co2 laser), invisible to human eyes. For example, suppose that the light hits the human eye, and the human eye does not respond at all, and does not know timely plevent it by closing the eyes. If the laser energy is slightly stronger at this time, it may cause blindness. (The phenomenon is: I suddenly went blind without noticing it).
Mention: If you value your eyes, these things are the real deal.
① When conducting high-energy laser experiments and research, not only must wear protective glasses,but also no reflective objects on the whole body. Such as watches.
②Laser protective glasses are mainly used to prevent laser spots and stray light. Even if you wear laser protective glasses, people cannot look directly at the laser.
③Please do not look directly at the laser, otherwise it will cause irre-versible and permanent eye damage.
