Industrial Water Chiller for 1.5kw Fiber Laser Source And Cutting Head Cooling TEYU S&A CWFL-1500
CWFL-1500 water chiller developed by S&A Teyu is made especially for fiber laser cutting applications up to 1.5KW. It features a dual channel design with control accuracy of ±0.5℃.
Two temperatures can be supplied from one single chiller unit for the fiber laser source and the laser cutting head, indicating up to 50% space saving comparing with the two-chiller solution.
Fiber laser tends to generate a vast mount of heat during operation. Excessive heat will increase the risk of component failure or degrade the performance of the laser. With this active cooling laser water chiller machine, not only the fiber laser but also the laser head can be perfectly cooled and their lifespans can be extended.
The warranty period is 2 years.
Features:
1. Dual channel design for cooling fiber laser and the laser head, no need of a two-chiller solution;
2. ±0.5℃ precise temperature control;
3. Temperature control range: 5-35 ℃;
4. Constant temperature and intelligent temperature control modes;
5. Built-in alarm functions to avoid water flow problem or temperature problem;
6. CE, RoHS, ISO and REACH compliant;
7. User-friendly temperature controllers for easy operation
8. Optional heater and water filter.
Specification :
Model:
| CWFL-1500AN | CWFL-1500BN |
| Voltage: | AC 1P 220V | AC 1P 220V |
| Frequency: | 50Hz
| 60Hz |
Unit Power:
| 2.78kw
| 2.76kw
|
Current:
| 3.4-13.7A
| 3.4-14A |
| Precision: | ±0.5°C | ±0.5°C |
| Pump power: | 0.75kw
| 0.75kw |
| Tank capacity: | 15L | 15L |
| Lift: | 53M
| 53M |
| Rated flow | 2 L/min+＞15 L/min |
| N.weight: | 72 Kgs | 72 Kgs |
| G.weight: | 82 Kgs | 82 Kgs |
| Dimension: | 70 X 47 X 89 cm (L X W X H) |
| Package dimension: | 74X 61 X 104 cm (L X W X H) |
Note:
1. The working current can be different under different working conditions; The above information is for reference only. Please subject to the actual delivered product;
2. Clean, pure, impurity free water should be used. The ideal one could be purified water, clean distilled water, deionised water, etc.;
3. Change out the water periodically (every 3 months is suggested or depending on the actual working environment);
4. Location of the chiller should be well ventilated environment. There must be at least 50cm from the obstacles to the air outlet which is on the top of the chiller and should leave at least 30cm between obstacles and the air inlets which are on the side casing of the chiller.
