TEYU S&A CWFL-4000 Industrial Water Chiller for 4KW Fiber Laser Cutting Machine
The CWFL series water chillers are so multi-functional that the fiber laser and laser head can be cooled by the low temperature control system and the high temperature control system respectively at the same time, which can greatly reduce the generation of the condensed water and save cost & space.
Teyu industrial chillers are applicable to cool fiber lasers，such as Raycus, Maxphotonics, IPG, nLIGHT,Trumpf,Rofin,Coherent and SPI and provide effective cooling for laser cutting machines, laser welding machines and laser marking machines
The warranty period is 2 years.
Features:
1. With environmental refrigerant;
2. ±1℃ precise temperature control;
3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
4. Dual temperature to satisfy different needs of fiber laser and laser head;
5. With Ion adsorption filtrating and test functions conform to fiber laser device operating requirements;
6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
7. Multiple power specifications; CE approval; RoHS approval; REACH approval;
8. Optional heater and water filter.
9. Support Modbus-485 communication protocol, which can realize the communication between the laser system and multiple water chillers to achieve two functions: monitoring the working status of the chillers and modifying the parameters of the chillers.
Specification :
Model:
| CWFL-4000EN | CWFL-4000BN |
| Voltage: | AC 3P 380V | AC 3P 380V |
| Frequency: | 50Hz
| 60Hz |
Unit Power:
| 4.8kw
| 4.8kw
|
Current:
| 3~9.5A | 3.4~23.5A |
| Precision: | ±1°C |
| Pump power: | 1.1kw
|
| Tank capacity: | 40L
|
| Lift: | 53M
|
| Rated flow | 2 L/min+＞40 L/min |
| N.weight: | 141 Kgs |
| G.weight: | 160Kgs |
| Dimension: | 87 X 65 X 117 cm (L X W X H) |
| Package dimension: | 95X 84 X 136 cm (L X W X H) |
Remark: the working current can be different under different working conditions; The above information is for reference only. Please subject to the actual delivered product.
Note:
1. The working current can be different under different working conditions; The above information is for reference only. Please subject to the actual delivered product;
2. Clean, pure, impurity free water should be used. The ideal one could be purified water, clean distilled water, deionised water, etc.;
3. Change out the water periodically (every 3 months is suggested or depending on the actual working environment);
4. Location of the chiller should be well ventilated environment. There must be at least 50cm from the obstacles to the air outlet which is on the top of the chiller and should leave at least 30cm between obstacles and the air inlets which are on the side casing of the chiller.
